Sunday, September 20, 2009

Less of the “how” and more of the “why”…







Here we are again, another week has gone. This last week has been full of just about every different aspect of photography that you could imagine… almost. Probably the most stressful part of the week gone was the fashion shoot that we held at our Perth based photography studio, here in Kelmscott.

Overall I am pretty happy with the images and the client was over the moon – so that’s good. A very brief collection of images are shown above.

As you saw in the previous blog posts, I was very eager to try out the new parabolic umbrella that I had just received from the wonderful folks at Paul C. Buff in the Nashville USA. In the days preceding the shoot I had tried a few different scenarios – moving the umbrella from one side of the studio to the other, focussing the beam, this angle and that and I have to say I was a little worried that it wasn’t going to live up to the very large expectations that I had heard of it.

This all went away though once Chloe from Chadwick Models stepped in front of the lens. I remember looking through my somewhat extensive catalogue of fashion magazines; which I often do for inspiration and to nick the odd pose or three, and wondering how the photographers were able to achieve a gorgeously soft full length light that encapsulated the model and at the same time left basically no shadows behind the models except by their feet. I for a long time thought it was achieved by using a strip softbox, so I went a bought one to try it out. It was close, but there was way too much shadow behind the models. Hmmm. Then I saw a video about a fashion shoot and the photographer was using one of the Profoto Parabolic Umbrellas. Problem solved!

After a little bit of finessing I was able to get the light positioned just were I wanted it to produce a lovely full length light. It was amazing too, that despite it’s 7 foot span, it was actually focussing the light so much that I was getting quite a bit of fall off along the top of the backdrop!

I was listening to one of my favourite photography podcasts the other day and I remember the photographer saying that his followers wanted to hear less of the “how” and more of the “why”. So, here goes. Why did I use the parabolic umbrella? Well if you want to produce beautifully even wrapping light with minimal shadow this is the puppy for you. Why do I like the umbrella? Despite its size it is not overpowering. I love the catch lights it gives in the subjects eyes. I love how soft it is. I love how the light wraps around my subject.

On this shoot I also used my beloved beauty dish with its grid attachment. It gives a very similar light on the subjects face to the parabolic umbrella but it falls off quite quickly. I really like the way the light from it totally falls off towards the edges of the backdrop. From the images above – you can tell that the ones on the left are from the parabolic umbrella and the ones on the right are from the gridded beauty dish.

Finally – why did I give the images a green cross-processed and de-saturated finish? Well the client and I decided that this finish really suited the same green-and-grey colours in the fabric of her designer garments. I ended up doing a couple of other different sets of tonal effects on the images but these were my favourites. If your looking at an un-calibrated monitor right now you are probably missing the whole effect and are just seeing a grey and green mess... its a shame really, they do look great I assure you!

And to finish; this afternoon I had a really great artistic nude shoot with a local model. It was a little bit different as the theme of the shoot was “anonymity”. Hence in almost every image you can see the models head but it is turned away or in shadow so you can’t really tell who it is. I was inspired by the work of Pascal Baetens and wanted to try and interpret his ideas - which I think we ended up doing fairly well… stay tuned for those images in the coming week or so.

Take care everyone. Bye… for now.

Saturday, September 12, 2009

Super Quickie Pre Shoot Update...

This is a super quick pre-shoot update for today’s fashion shoot.

The client has requested that we use a white paper backdrop, but just rolled down to floor level, the model will be standing on the floorboards instead of the paper. I have set up four different lights as shown in the somewhat dodgy iPhone image. All are single light set-ups for simplicity of lighting and shadows on the models. We wanna showcase the designers clothes not how good I am at setting up multiple lights in the studio.

Parabolic Umbrella

Beauty Dish with Grid attachment

Straight bowl reflector for harsh shadows on the backdrop

Ring flash

I’ve made a very quick and VERY low-tech video showing all of these set-ups which I’ll post along with images from the shoot itself later this evening.

Wish me luck!

Tuesday, September 8, 2009

Playing with the Parabola...

I know what you are thinking – three blog posts in three days… what’s going on?

Well today my 86” Parabolic Light Modifier Umbrella (PLM) showed up from Paul C. Buff all the way in Nashville, Tennessee USA. It only took 72 hours to get here too – well done UPS! The image here should give a little bit of an indication of the sheer size of this beast.

Now, I am a little restricted in my studio space with it's eight and a half foot ceilings but after a little bit of playing around with positioning angles and heights I was able to get a few nice single light set-ups. Shadows can be controlled depending on how close or far the light is from the subject and the angle to which it is positioned. Nice. David Griffin has done a wonderful review of this product on the Studiolighting.net website; some of which reads –

“The light pattern and quality created by the PLM is nothing short of incredible. Paul C. Buff has created something that's amazingly CHEAP, versatile, and even practical! From the smaller 42" PLM to the larger 86" PLM this is THE light mod to own. Imagine this, go out on a non-windy summer day under 12 o'clock devil light… you need to overpower the sun but don't have a flash over 160 watts. Pull out a sandbagged PLM 42" or larger and Get Ta Shootin! In my test I could pretty much overpower the sun with F16, ISO100 at 1/250th with a 100 watt bare bulb flash from about 4.5 feet away or closer! Its safe to say that this is my new favourite light modifier. I'm shocked that it’s not being hailed all over the net. But that's okay I'm a trailblazer anyway - you'll see what I've done with it in my next magazine spread!

The PLM is by far the most revolutionary light modifier I have seen. I without a doubt or restraint challenge everyone to find a more versatile 7ft light modifier for $112.91 or less!!! If you do, send it too me so I can A) review it and B) start using it! As this item quickly goes to the top of my cheap list… I say hey… GET THIS tool… and you know what… GET TA SHOOTIN!”

So there you go; a versatile light modifier that has a multitude of uses, and it's about $5000AUD cheaper than the Profoto alternative. I have a fashion shoot for a client this weekend that I am eager to try this puppy out for! I will be posting images from that shoot so you can see the results of the light produced by the PLM

The last image below shows the cool and rather unique catch lights that the PLM makes in the subjects eyes – which I like very much. I think I am going to be using this thing quite a lot…


Monday, September 7, 2009

How to shoot a fashion show when you're not supposed to be shooting a fashion show...

Just a quickie again tonight… this evening my friend Jonathan and I headed out to see the Morrison show at Perth Fashion Festival. We bought tickets and thought we would just show up and take some photos like we did on Sunday gone. Not so.

First we had to get past the girl on the door; kind of the assistant organiser (she actually reminded us of Anne Hathaway’s character in “The Devil wears Prada"!) then we were faced with the “security guard” who looked more like he should be in a Benny Hill movie (showing my age??) and then the event co-ordinator herself came out to talk to us. We were told on no uncertain terms that there was no room and we would not be able to shoot. Great.

Anyway we got inside finally and discovered we must have got the last 2 tickets on sale as we were right up in the far corner of the room and the view was mediocre at best. Nonetheless I was determined to take some images come hell or being thrown out so these images are the result. I realise they are far from perfect but they tell a story… kinda…

Oh, and BTW once the show got underway there was more than enough room to fit about 4 more photographers on the shooting platform - yet instead I had to sit up in the top corner of the room taking mediocre shots when Jonathan and I could have been on the shooting platform taking awesome shots. Go figure.

PS – please do have a look at the image gallery on my website – www.timography.net. Once again I was blown away at just how clean the images are that the D700 took – I was at ISO2000 and I challenge you to find a bit of chroma noise. The images are just so squeaky clean. Love it. Seriously love it.

Sunday, September 6, 2009

No time to scratch one's self... and some new stuff...



Holy cow – I know I say it like every blog post – but geez it’s been a busy couple of weeks! Clients, shoots, new equipment, new software, new studio accessories, physiotherapists, more clients, more shoots, post production coming out of my… well, you know what.

So am I forgiven for not posting a new blog entry for a week or two? To summarise the last couple of weeks; my new Nikon D700 arrived freshly packed from those good guys at B&H Photo in New York. I am still getting to grips with it but it is awesome, but we already knew that right. I still love my old Fuji’s but the D700 is a welcome addition. This also meant that I had to look for some new tethered shooting software. I have been using Fujifilm’s Hyperutility Software in the studio and I have become very attached (pun intended) to the idea of shooting tethered in the studio. It is invaluable for a number of reasons. Once you have tried it you will not go back.

So anyway, I had to find a new alternative. I found it in the shape of Phase One’s newly revised Capture One Pro 4.8 software. It’s amazing. But more on that later…

Today saw me and a very good friend at the Perth Fashion Festival 2009 – Style Oasis fashion parades. Together we had applied for media accreditation but due to the "overwhelming number of applicants we were unsuccessful." That didn’t mean that we couldn’t still show up with our cameras though!

Having been busy with clients lately I was eager to try out the D700 at a fashion show that was actually properly lit for photography, unlike the downright awful lighting at this years EveryWoman Expo, as I covered back in this blog post. And I can safely say I was gobsmacked by the results! I spent the whole show in ISO1600, f/3.2 and the shutter speed was hovering around the 500th to 1000th of a second range. Autofocus was set to AFS-C in Dynamic 51 point 3D Tracking mode. Wow. Oh yeah, I have the release mode set on the camera so that the shutter will not fire unless the subject is in focus. An invaluable feature that is essential in a fashion catwalk show when the models are pacing up and down the catwalk at a great rate of knots. I found out today that some Canon cameras do not have that feature… that’s too bad!

So yeah, apart from a few exceptions where the models walked directly in front of one of the overhead spot lights, the D700’s metering was pretty spot on. This was also partly my fault as I did not realise until halfway through the first show that I had the cameras metering in evaluative 3D Matrix metering mode (where the camera samples the entire scene to obtain an “acceptable” exposure) instead of centre-weighted. After I made the switch I noticed much fewer images were being blown out.

So, all in all it was a successful outing. I hope you all realised that the images I have posted in this blog entry are from today's fashion shows. I have tickets to see the Morrison show tomorrow evening so stay tuned to more images from Perth Fashion Festival 2009. I have placed a couple of image galleries on my website here. Have a look and don't forget to have a look around the rest of our Perth Based Photography website while you are at it! (shameless google plug there...)

And to finish this weeks blog post, I have made a short video which gives a quick overview of the aforementioned Capture One Pro 4.8 software. As I say in the video, it is just a brief summary of the features of the package and not a full-blown instructional video as I do not know the software well enough at this point to do so… but here’s the video anyway.

Well, I hope you liked it and the video told a little bit of a story.

Ok, I’m outta here. It’s getting really late and it’s going to be a super busy week again (déjà vu?) so take care everyone and keep taking pictures!

Monday, August 24, 2009

Video Blog #5 - Shooting Portraits in a Light Tent...

So it’s another week and time for another blog post. This week has mainly been a family affair with photography taking a bit of a back seat for a few days. It was nice and kind of weird all the same… on one hand it was great not to have to worry about clients, accounts, web updates or pending shoots; but on the other hand I did really miss not doing all of those things. Is that normal?

This week also saw some great news in that I finally ordered my new Nikon D700 & accompanying MB-D10 Battery Grip plus a few other extra goodies including a couple more of the brilliant Bowens Pulsar Radio Transceivers from B&H Photo in New York. It took a phone call (from my cell phone!) to the US to sort out the price but it’s finally on it’s way. I can’t wait.

But the most important thing about this blog post is our latest Video Tutorial. Sadly this will be the last one for a couple of months as my good mate and he who owns all the video equipment and has the expertise to put the whole thing together is going out of town for a while. Not to worry, please click on the window below and enjoy the video. I will briefly explain the set-ups in the video after…



Ok, for all of these set-ups, my camera settings were – ISO100, 1/125th second @ f/8.0. when we recorded the intro we were planning to show the set-up using a high key background – but alas time got away from us and to keep the video under 10 minutes to appease the YouTube god’s we had to cut that bit out. Never mind.

Set-up #1 – Single overhead softbox. This is enough all on its own to create a nice headshot. Nothing too complicated just simple, elegant light. You could have any colour backdrop behind your subject, just be aware that it will be quite a lot darker in the final image as it is not being directly lit.

Set-up #2 – Single overhead softbox augmented by a reflector. This makes such an unbelievable difference without actually adding any extra light; rather we are just bouncing the available light around even more. Cool huh.

Set-up #3 – Single overhead softbox augmented by a background light. In a similar manner to the technique shown in Video Blog #2, we are using a single light on the backdrop which is controlled by using a grid attachment. It was set to meter at f/5.6, or 1 stop less than the key light (at f/8.0 remember). This is not so critical on a white background but becomes more apparent then you are using a coloured backdrop, once again as covered in my blog post Video Blog #2.

Set-up #4 – Single overhead softbox augmented by a background light and using subtractive lighting with the foam core panel. Wow that’s a mouthful. This is where things start to get cool. Take notice of the two still images that are shown on the video. Note that there is shadow on the left side (models right side) of Jaylee’s face, even though we are still only using one overhead light. This is because the white panel on her left is reflecting light but the black panel on her right is absorbing the light. This is so easy to achieve and you could even substitute a piece of black cardboard of you don’t have a foam core at your disposal. Once again the backdrop light is metered to f/5.6 so it doesn’t stand out too much.

Set-up #5 – Single overhead beauty dish augmented by a background light and using subtractive lighting with both of the foam core panels. This goes further to enhance the shadows produced by the black foam cores. Another bonus is that the grid reflector on the beauty dish is now killing the spill from the key light that was falling onto the backdrop in the previous set-ups, hence the reason the backdrop appears much darker; even though I have not changed the metering from the last set-up. The backdrop light has been moved however from the floor stand directly behind the model to off to the side wall of the studio, but it is still aimed at the same spot on the backdrop and still metered at f/5.6 to make the backdrop appear to be a darker red than it actually is; remembering that our key light is still metered at f/8.0. Easy!

So there you go - some really simple lighting set-ups to achieve some nice looking headshots in the studio with only one or two lights. I hope you got something out of it! See you in the next blog post...

Sunday, August 16, 2009

Less is more...

Wow – yet another week has been and gone – I think I blinked and missed it.

As usual there has been lots’ going on this last week. Not so much behind the camera; although I did do a couple of low key commercial shoots. But over-all, this week has been more in the office than in the studio. We have been discussing and planning some changes for our website – http://www.timography.net/ and in the interim I have uploaded some new images to the home page to give our little Perth based Portrait, Fashion and Glamour studio a fresh appearance. Also, after months of lying dormant – I managed to get our VoIP phone up and running; albeit after a little bit of bother because the NetComm VoIP connector and iinet didn’t want to play nicely together, but after a stern talking to they are now behaving nicely.

Anyway, down to tonight’s topic. For those of you who have seen our Video Blog Post #1 you would know that I like to use prime lenses. What’s a prime lens you ask? Well that’s a good question in today’s consumer based market that is ruled by zoom lenses. Well, a prime lens has a fixed focal length. They are commonly found in 24mm, 35mm, 50mm, 85mm and 105mm focal lengths, plus a few more, but those are the more popular ones.

So what’s the advantage of a prime lens I still hear you asking? Well, it’s distortion, or gross lack of it. You see, a prime lens has a lot fewer optical elements to make it work – and the more lens elements you put into a lens (e.g., a zoom lens) the more distortion and aberrations you have to deal with which need to be corrected. Prime lenses are also physically lighter than zoom lenses for this very reason. But the best bit is because there are less lens elements the light can pass through a lot easier so all of a sudden you find that without too much trouble you can get a relatively cheap lens with a minimum aperture of f/1.8! Cool.

There are 100 other reasons why a prime lens is optically superior to a zoom, but I’ll give you just one more. As I hinted to earlier, the best benefit other than a super-fast aperture is that your images are going to be a lot sharper. Let me explain. Every single lens ever made has a sweet spot. This is usually (at a given focal length) two or three stops from “wide open” or the largest aperture your lens is capable of. Now with most entry level kit lenses that come with your D-SLR this minimum f/stop is anywhere from f/3.5 to f/6.3 depending on the focal length of the zoom. So, in a worst case scenario you are looking at about an aperture of f/8 or even f/11 before you start to get really sharp (from edge to edge) images. This is fine if you are in a studio situation and have 1.21 gigawatts of flash power at your disposal to light the scene but pretty much useless for anything else except for outdoor photography in pretty decent sunlight. Also, the depth of field or “bokeh” at f/11 isn’t all that great and you will have a pretty hard time getting a pleasant blur from your background.

Now think of your prime lens with it’s minimum aperture of say, f/1.4. At the risk of complicating things a little more, because of the fewer optical elements within the lens it is already going to be a lot sharper wide open than a zoom, but by the time you stop the lens down to say f/2.8 or f/3.2 you are going to be able to cut yourself on the image – it’s that sharp! Not to mention the awesome depth of field and creamy bokeh that you will be getting. So this is a recipe for some fantastic natural light indoor photography that otherwise would be impossible with a zoom lens, as well as fantastic optical quality in just about every situation that you throw at it.

And to finish – the downside of using a prime lens. You have you get off your butt and move around, as your legs are now the zoom mechanism of the lens instead of those light-robbing and distorting extra elements in a zoom lens. You have to look for the right shot, the right composition, not just by twisting your left wrist. You have to make it happen. Sometimes it’s hard – but it’s always worthwhile when you see the end result.

I dare you, go out and get yourself a cheap little 50mm f/1.8 prime lens. Nikon, Canon and Sony – they all make one. They are light weight, small and totally awesome! You will not regret it. Unlock your potential!

PS - todays image was taken with my iPhone - another camera with a prime lens!

Friday, August 7, 2009

Just a quickie...

This is just a quick little post – normal programming will resume in the next post!

I just wanted to share a couple of things. Firstly I had a fantastic meeting with a couple whose wedding I will be photographing early next year. They are a couple of lovely personalities and I am really looking forward to shooting their wedding on the beach in the late summer afternoon sun… cool!

Secondly, remember the old blog post where I told everyone that I took my camera bag everywhere? Well as luck would have it, today’s meeting with my clients saw me travel 106 kilometres up and down Perth’s freeways getting to and from their venue. I also happened to stumble (or is it drive) upon a simply gorgeous sunset. I always keep a mini tripod in my car, and as I had my camera bag with me I quickly pulled over and grabbed this sunset shot. Cool huh. And I was still 2 ½ minutes early for my appointment.

Enjoy your weekend and I’ll catch you all again soon.

Wednesday, August 5, 2009

Better late than never...

After much procrastination and other things getting in the way I have finally managed to finish the images I took at this years EveryWoman Expo at the Perth Convention and Exhibition Centre. Thank god.

It has taken nearly two months and about 11 visits to my Physiotherapist (for spending far too much time in front of the PC with bad posture!) to cull the 4371 images down to an almost manageable 650ish.

I ended up doing the majority of the post-processing in Lightroom 2; something that is new to me. Let me explain. I usually do all of my post production straight into Photoshop CS3, one image at a time – for a couple of reasons. Firstly, I am really familiar with PS and most of the editing doesn’t take all that long once the image has actually opened. Secondly, for some time (and possibly incorrectly) I have been of the opinion that the end result of an image edited in PS just looked… better – than the same adjustment made in Lightroom. Now I realise that the same processing and editing engines that run PS are in Lightroom (albeit in a less powerful incarnation) but call me silly and old-fashioned; I just liked Photoshop more.

The problem with Photoshop arises however when you start to open lots of images, lots and lots and lots of images, all at once. I have a pretty souped up workstation but it really starts to suffer with this. No such problem with Lightroom however! Yay. And I am now a lot more familiar with Lightroom’s capabilities than I was two months ago too.

I did really struggle with the colours that the Nikon D700 was producing compared to my beloved Fujifilm S5 Pro. There seemed to be neither rhyme nor reason for the out-and-out colour shift from one image to the next. The image gallery that I have uploaded to my website contains about 90% D700 images – simply because that camera body took 90% of the images over the weekend of the Expo; but anyway you will see what I mean with the colour shifting. Bear in mind also that you are viewing images after I have tried to tweak them in Lightroom. The images look quite acceptable when viewed individually, but played one after the next the colour shifting becomes evident.

And to finally put the Nikon D700 vs. Fujifilm S5 Pro comparison to bed; after now reviewing every single image from the weekend I can safely say that the D700 showed much less noise than the Fuji, but the colours produced by the S5 Pro still amaze me, and they are consistent (for the most part) shot to shot unlike the D700. Both cameras have the same resolving power (they are both 12 megapixels after-all) and given time I am sure I could get used to the one big-ass menu on the D700 as opposed to the separate (and brilliantly done) dual menus on the S5 Pro. As for the rather mediocre pixel count of both these cameras in today’s market – I feel it really apt to adopt and slightly modify a saying that Porsche drivers have been saying for years to their Italian counterparts – “it’s not how many pixels you have – it’s how you use and process them that matters!” I don’t want to get into a half hour lecture of the advantages of less pixels = bigger pixel sites which in turn = more photons hitting said pixel sites which finally = MUCH more dynamic range and less noise than a camera with a similar sized sensor but a higher resolution. You just have to trust me on this. If you don’t believe me, ask Google!

Anyway, I am really looking forward to the next few weeks. I have a few model portfolio shoots lined-up with new models which give me the luxury of being able to try new ideas and lighting scenarios. To this day previous model development shoots I have done produced some of my best work – in my own opinion. When the pressure is off and you have free reign to do whatever it really does make for a fun time! I can’t wait.

Friday, July 31, 2009

Video Blog #4 - Using a Light Meter...

I am pleased to say that today’s video blog is back to the usual high standard as produced by my good mate John.

There was a bit of discussion regarding the subject matter we would discuss, and the more we thought about it the more we realised that it would take 4 hours to properly cover all of the topics that are discussed. But rather than bore you all at once with an extended Studio Lighting 101 lecture I thought it was best to keep the ideas shared at a very high level; but we will certainly be drilling down into more detail if future video blog episodes… so stay tuned!

Ok, back to today’s video blog. I’ll try to keep this text short and use it just to supplement the information in the video. Please remember what is discussed in the video is a guide only. The core ideal around photography is creativity. Now I didn’t really get the opportunity to get too creative in this episode, rather I just give a brief overview of “getting started” with achieving a balanced exposure. What you do with it from there is entirely up to you and your own creative genius! So here we go…


Timography Vblog Light Meters from Tim Watson on Vimeo.


1. Use the light meter in your camera! All D-SLR’s on the market today are equipped with their very own ambient light meter which will work just fine for all of your “general” photography requirements – that’s a given. Now there are a stack of things to remember when using your camera’s built in light meter though. The biggest one is that, by default (and there is nothing you can do about it!) the camera’s light meter will try to read every scene you point it at as 18% grey – this is your camera’s way of trying to get the best tonal range in a scene. This doesn’t always work though.

As a couple of extreme examples – if you are shooting a very bright scene such as on a beach in midday sun or in the snow, the camera reads the scene and will try to pull it back to 18% grey; therefore grossly underexposing the image. In a similar manner if you are shooting a very dark scene like a theatre show or a night cityscape, the camera will similarly try to drag the dark scene up to 18% grey therefore grossly overexposing the scene. This is exactly the problem I encountered a few weeks back shooting the fashion shows at Every Woman Expo 2009.

This is fairly easy to overcome though by dialling in opposite exposure compensation – but keep it in mind next time you have problems shooting a particularly bright or dark scene.

2. The “Sunny 16” rule is great to get you started. Of course the best way to start getting really creative with your photography is to take your camera off the Auto setting and shoot manually. Again you can use your camera’s in-built light meter to good effect here, but remember if you are outside in bright daylight, you will get spot-on exposure if you set your camera to 1/125th second @ f/16.0 using ISO100. Similarly use 1/250th second @ f/16.0 at ISO200, 1/500th second @ ISO 400 and so on.

The variations I spoke of in the video are as follows (1/125th second @ ISO100)-

f/16 – Sunny

f/11 – Slightly Overcast

f/8 – Overcast

f/5.6 – Heavily Overcast

3. Exposure Slide Rules are a handy tool to get you off and running quickly. Obviously they are not going to be spot on 100% of the time – but they will certainly give you a reasonable starting point to get you going.

4. I love my light meter. They are hugely versatile and allow you to get the “look” you are trying to achieve before you take the first image. However – they are so versatile and there are so many things that you can do with one that I think I will keep this text really short otherwise this will turn into a 1000 word essay. Just watch the video and bear in mind that I will be going into more detail in future video blogs.

Also, we didn’t have a model for this video blog to show you what the images would look like, but you can get a fairly good indication by looking at the light coming from the modelling lights, which were set to be proportionally as bright as the flash power setting.

Ok, so I know it is brief but we have tried to take a huge topic and break it down into little bite-sized chunks. Over the next few video blogs I’ll be showing you some more specific lighting set-ups and we’ll incorporate using the light meter into those examples.

That’s it for now – I’m running late to take my wife and son out for the day to the Good Food and Wine Show. I’m a bit of a wannabe chef in my spare time so I’m really looking forward to it… if you’re in Perth I might even see you there!